Fecon Forestry Equipment Australia

Commercial position

Fecon forestry equipment range and applications

Fecon Australia offers sales, service, parts and dry hire nationally, and states that its Australian parts operation carries substantial local inventory. The dry-hire route is commercially useful: win the project, hire the attachment, measure actual productivity, determine annual demand, and purchase only once utilisation is demonstrated.

Fecon's Australian position is built as much on the commercial model as on the machines. Alongside excavator mulchers, skid-steer mulchers, dedicated mulching tractors, tree shears and stump equipment, Fecon Australia offers sales, service, parts and dry hire nationally.

That dry-hire route is the most under-used commercial tool in the attachment market. The sequence — win the project, hire the attachment, measure actual productivity, establish annual demand, then purchase once utilisation is demonstrated — removes almost all the risk from an attachment decision. Very few contractors use it, and most who buy on a forecast rather than a measurement regret it.

The excavator mulcher range covers roughly 5-tonne to 45-tonne carriers, spanning most of the Australian vegetation management and land-clearing market from council roadside work to large-scale site preparation.

Buyer fit

Who should buy Fecon forestry equipment

An equipment reference that only says where a brand fits is a brochure.

Suits you if

Vegetation and land-clearing contractors converting an existing excavator to mulching
Businesses with uncertain mulching demand who should hire before buying
Operations needing one supplier across mulchers, shears and stump equipment
Contractors who value local parts holding on a high-consumable attachment

Look elsewhere if

Large accessible areas where a tractor PTO outfit delivers more hectares per day
Continuous high-hour mulching where a dedicated carrier wins on cooling and duty cycle
Operations wanting a single forestry OEM across harvesting machines as well as attachments

Australian support

Fecon Australian dealers, parts and service support

For commercial forestry the dealer is part of the equipment. Entries marked as confirmed were checked against the supplier's own published information.

Australian range and support

Confirmed

Fecon Australia's excavator mulcher range covers carriers from roughly 5 tonnes to more than 40: FMX36 and FMX50 (5-15 t, 45-151 L/min), CEM36 (7-15 t, 64-151 L/min), BH47-62 (12-20 t, 103-283 L/min) and the BH40-200 range (15-45 t, 114-397 L/min). Sales, service, parts and hire are offered nationally.

Before you commit

Fecon equipment buying checklist

Which model matches your carrier's continuous — not peak — hydraulic flow
Hectares per hour in a demonstration in representative vegetation, not a demo paddock
Tooth wear per hectare in your soil and rock conditions
What is actually held in Australian parts inventory for your specific model
Whether dry hire is available for a first project to prove utilisation

Comparison

Fecon forestry equipment alternatives

Where another supplier would genuinely serve the same requirement better.

FAEComparable breadth across mulchers, tillers, stump cutters and multifunction heads, with an Australian operation since 2006.

TigercatIf utilisation justifies a purpose-built mulching carrier rather than an attachment.

Method

How to compare Fecon with competing brands

Comparing Fecon like for like

Against FAE and Tigercat the comparison should run on sustained capability rather than headline material capacity. Compare required continuous flow and pressure against your carrier's ratings with headroom, ask each supplier what cooling they specify for continuous duty at your ambient temperatures, and compare tooth and tool-holder cost per hectare in conditions like yours rather than list prices. Dry hire, where available, measures the last of those directly instead of estimating it.

Range

Fecon forestry machines and attachments

Bull Hog mulchers
Excavator mulchers
Skid-steer mulchers
Forestry tractors
Tree shears
Stumpex systems

Model pages

Fecon machines covered in this guide

Published specifications, commercial fit and verification points for each.

Fecon

BH47-62

Excavator mulching head for 12-20 t carriers at 103-283 L/min — the common Australian vegetation class.

Brand vs brand

Compare Fecon with realistic alternatives

Head-to-head buying decisions built around application, configuration, support and whole-life cost.

Brand comparison

Fecon vs FAE

Which mulching system should an Australian vegetation contractor shortlist?

Australian supply

Fecon suppliers and dealers in Australia

Network structure, equipment coverage and the commitments to verify before purchase.

Fecon Australia

Australian sales, service, parts and dry-hire support for Fecon mulchers, forestry tractors, tree shears and stump-treatment systems.

Cross-reference

Fecon forestry equipment categories

Benchmark specifications, buying criteria and specification traps for each class.

Forestry mulchers

The strongest crossover market in Australian forestry — plantations, councils, utilities, mining, solar and fire.

Tree shears

Turns an ordinary excavator into a controlled tree-cutting machine — the fastest-growing attachment category.

Stump grinders

A specialised removal business, not conventional logging — and never quote it by visible diameter.

Common questions

Fecon forestry equipment FAQs

What Fecon mulcher suits my excavator?

The Australian range brackets by carrier size and flow: FMX36 and FMX50 for 5-15 tonne machines at 45-151 L/min, CEM36 for 7-15 tonne at 64-151 L/min, BH47-62 for 12-20 tonne at 103-283 L/min, and the BH40-200 range for 15-45 tonne at 114-397 L/min. Match to continuous flow at working pressure and temperature rather than peak flow or tonnage alone.

Can I hire a Fecon mulcher before buying?

Yes — Fecon Australia offers dry hire alongside sales, service and parts. That is the sensible sequence where utilisation is unproven: win the project, hire the head, measure hectares per hour, litres per hectare and tooth wear per hectare, then buy once annual demand is demonstrated.

Fecon or FAE?

Both have genuine Australian operations and comparable mulching coverage. FAE spans a wider product set including forestry tillers, stump cutters, stone crushers and multifunction heads, which matters for reclamation work. Fecon's dry hire is the stronger route where you want to prove utilisation first. Compare on local parts holding for your specific model and on measured productivity in your vegetation.

What does a mulching head cost to run?

Teeth and tooth holders dominate, and rock rather than vegetation drives them. In abrasive Australian soils the annual tooth bill on a high-utilisation head can rival the finance cost, which is why tooth wear per hectare — not per week — is the figure to track and price into your rate.

How to compare Fecon forestry equipment quotations

Brand strength is one input among eleven in the machine selection scorecard, where purchase price carries 3% and reliability, local service and parts availability together carry 40%. Make sure two quotations are genuinely comparable first — use the dealer quote checklist.

Fecon Forestry Equipment in Australia